ANNEX IU.K.PARAMETERS AND PARAMETRIC VALUES

PART AU.K.Microbiological parameters

The following applies to water offered for sale in bottles or containers:

PART BU.K.Chemical parameters

Note 1:U.K.

The parametric value refers to the residual monomer concentration in the water as calculated according to specifications of the maximum release from the corresponding polymer in contact with the water.U.K.

Note 2:U.K.

Where possible, without compromising disinfection, Member States should strive for a lower value.U.K.

For the water referred to in Article 6(1)(a), (b) and (d), the value must be met, at the latest, 10 calendar years after the entry into force of the Directive. The parametric value for bromate from five years after the entry into force of this Directive until 10 years after its entry into force is 25 μg/l.

Note 3:U.K.

The value applies to a sample of water intended for human consumption obtained by an adequate sampling method(1) at the tap and taken so as to be representative of a weekly average value ingested by consumers. Where appropriate the sampling and monitoring methods must be applied in a harmonised fashion to be drawn up in accordance with Article 7(4). Member States must take account of the occurrence of peak levels that may cause adverse effects on human health.U.K.

Note 4:U.K.

For water referred to in Article 6(1)(a), (b) and (d), the value must be met, at the latest, 15 calendar years after the entry into force of this Directive. The parametric value for lead from five years after the entry into force of this Directive until 15 years after its entry into force is 25 μg/l.U.K.

Member States must ensure that all appropriate measures are taken to reduce the concentration of lead in water intended for human consumption as much as possible during the period needed to achieve compliance with the parametric value.

When implementing the measures to achieve compliance with that value Member States must progressively give priority where lead concentrations in water intended for human consumption are highest.

Note 5:U.K.

Member States must ensure that the condition that [nitrate]/50 + [nitrite]/3 ≤ 1, the square brackets signifying the concentrations in mg/l for nitrate (NO₃) and nitrite (NO₂), is complied with and that the value of 0,10 mg/l for nitrites is complied with ex water treatment works.U.K.

Note 6:U.K.

‘Pesticides’ means:U.K.

• organic insecticides,

• organic herbicides,

• organic fungicides,

• organic nematocides,

• organic acaricides,

• organic algicides,

• organic rodenticides

• organic slimicides,

• related products (inter alia, growth regulators)

and their relevant metabolites, degradation and reaction products.

Only those pesticides which are likely to be present in a given supply need be monitored.

Note 7:U.K.

The parametric value applies to each individual pesticide. In the case of aldrin, dieldrin, heptachlor and heptachlor epoxide the parametric value is 0,030 μg/l.U.K.

Note 8:U.K.

‘Pesticides — Total’ means the sum of all individual pesticides detected and quantified in the monitoring procedure.U.K.

Note 9:U.K.

The specified compounds are:U.K.

• benzo(b)fluoranthene,

• benzo(k)fluoranthene,

• benzo(ghi)perylene,

• indeno(1,2,3-cd)pyrene.

Note 10:U.K.

Where possible, without compromising disinfection, Member States should strive for a lower value.U.K.

The specified compounds are: chloroform, bromoform, dibromochloromethane, bromodichloromethane.

For the water referred to in Article 6(1)(a), (b) and (d), the value must be met, at the latest, 10 calendar years after the entry into force of this Directive. The parametric value for total THMs from five years after the entry into force of this Directive until 10 years after its entry into force is 150 μg/l.

Member States must ensure that all appropriate measures are taken to reduce the concentration of THMs in water intended for human consumption as much as possible during the period needed to achieve compliance with the parametric value.

When implementing the measures to achieve this value, Member States must progressively give priority to those areas where THM concentrations in water intended for human consumption are highest.

PART CU.K.Indicator parameters

Note 1:U.K.

The water should not be aggressive.U.K.

Note 2:U.K.

This parameter need not be measured unless the water originates from or is influenced by surface water. In the event of non-compliance with this parametric value, the Member State concerned must investigate the supply to ensure that there is no potential danger to human health arising from the presence of pathogenic micro-organisms, e.g. cryptosporidium. Member States must include the results of all such investigations in the reports they must submit under Article 13(2).U.K.

Note 3:U.K.

For still water put into bottles or containers, the minimum value may be reduced to 4,5 pH units.U.K.

For water put into bottles or containers which is naturally rich in or artificially enriched with carbon dioxide, the minimum value may be lower.

Note 4:U.K.

This parameter need not be measured if the parameter TOC is analysed.U.K.

Note 5:U.K.

For water put into bottles or containers the unit is number/250 ml.U.K.

Note 6:U.K.

This parameter need not be measured for supplies of less than 10 000 m³ a day.U.K.

Note 7:U.K.

In the case of surface water treatment, Member States should strive for a parametric value not exceeding 1,0 NTU (nephelometric turbidity units) in the water ex treatment works.U.K.

Note 8:U.K.

Monitoring frequencies to be set later in Annex II.U.K.

Note 9:U.K.

Excluding tritium, potassium -40, radon and radon decay products; monitoring frequencies, monitoring methods and the most relevant locations for monitoring points to be set later in Annex II.U.K.

Note 10:U.K.