Search Legislation

The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment Regulations 2004 (revoked)

Changes to legislation:

There are currently no known outstanding effects for the The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment Regulations 2004 (revoked). Help about Changes to Legislation

Close

Changes to Legislation

Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.

  1. Introductory Text

  2. PART 1 INTRODUCTORY PROVISIONS

    1. 1.Citation and commencement

    2. 2.Interpretation

    3. 3.Application

    4. 4.Application to international carriage

    5. 5.Application to tanks, pressure receptacles, battery-vehicles, battery-wagons, MEGCs, UN MEGCs and transportable pressure equipment

    6. 6.Application to armed forces

    7. 7.Exemptions

    8. 8.Competent authority

  3. PART 2 REQUIREMENTS OF ADR AND RID

    1. 9.Training

    2. 10.Safety obligations

    3. 10A.Security provisions

    4. 11.Class 7 goods for carriage by rail

    5. 12.Safety advisers

    6. 13.Reports on accidents or incidents

    7. 14.Emergency plans for marshalling yards

    8. 15.Classification of goods

    9. 16.Prohibition from carriage

    10. 17.Dangerous goods list and special provisions

    11. 18.Use of packagings

    12. 19.Use of tanks, battery-vehicles, battery-wagons, MEGCs and UN MEGCs

    13. 20.Consignment

    14. 21.Construction and testing of packagings and packages

    15. 22.Construction and testing of tanks, battery-vehicles, battery-wagons, MEGCs, UN MEGCs and bulk containers

    16. 23.Carriage, loading, unloading and handling

    17. 24.Vehicle crews, equipment, operation and documentation

    18. 25.Construction and approval of vehicles

  4. PART 3 COMPETENT AUTHORITY FUNCTIONS

    1. 26.Interpretation of Part 3 and Schedule 3

    2. 27.Grant of approvals by the GB competent authority

    3. 28.Grant of unilateral and multilateral approvals by the GB competent authority in relation to class 7 goods for carriage by rail

    4. 29.Appointment of persons by the GB competent authority

    5. 30.Recognition of approvals, tests, methods, standards and procedures etc. by the GB competent authority

    6. 31.Imposing of requirements by the GB competent authority

    7. 32.Issuing of safety adviser vocational training certificates by the GB competent authority

    8. 33.Issuing of driver training certificates by the GB competent authority

    9. 34.Notification under sub-section 1.8.2.2 of ADR or of RID

    10. 35.Miscellaneous functions of the GB competent authority

    11. 36.Exemption certificates, temporary and ad hoc exemptions

  5. PART 4 TRANSPORTABLE PRESSURE EQUIPMENT

    1. 37.Interpretation of Part 4

    2. 38.Placing on the market and use at work of transportable pressure equipment

    3. 39.Transportable pressure equipment placed on the market and used at work exclusively in Great Britain

    4. 40.Reassessment of conformity

    5. 41.Periodic inspection and repeated use

    6. 42.Notified bodies

    7. 43.Approved bodies

    8. 44.Appointment of notified bodies and approved bodies by the competent authority

    9. 45.Conformity marking

  6. PART 5 ADDITIONAL REQUIREMENTS TO ADR AND RID

    1. 46.Attendant for carriage of class 1 goods by road

    2. 47.Duration of carriage and delivery of class 1 goods by road

    3. 48.Miscellaneous security requirements for carriage of class 1 goods by road

    4. 49.Miscellaneous security requirements for carriage of class 1 goods by rail

    5. 50.Security requirement for carriage of class 1 goods by road or rail and class 7 goods by rail

    6. 51.Carriage of class 1 goods in vehicles used to carry passengers for hire or reward

    7. 52.Carriage of class 1 goods by road in motor vehicles

    8. 53.Marshalling and formation of trains

    9. 54.Keeping of information by carriers

    10. 55.Placards, marks and plate markings for carriage within Great Britain

  7. PART 6 MISCELLANEOUS

    1. 56.Fees

    2. 56A.Fees for certificates and applications for the issuing of driver training certificates and safety adviser vocational training certificates

    3. 57.Transitional defence

    4. 58.Defence and enforcement

    5. 59.Amendments to the Health and Safety (Fees) Regulations 2004

    6. 60.Amendments to Chemicals (Hazard Information and Packaging for Supply) Regulations 2002

    7. 61.Amendments to the Classification and Labelling of Explosives Regulations 1983

    8. 62.Consequential amendments

    9. 63.Revocations and savings

  8. Signature

    1. SCHEDULE 1

      OLD TANKS

      1. 1.Interpretation

      2. 2.Construction of tanks of old tank-vehicles, tank containers and old tank wagons for carriage by road or rail

      3. 3.Testing, examination and maintenance for carriage by road or rail

      4. 4.Testing, examination and maintenance for carriage by road

      5. 5.Testing, examination and maintenance for carriage by rail

      6. 6.Use of old tank-vehicles, old tank wagons or tank-containers for carriage by road or rail

      7. 7.Keeping of documents

      8. 8.Appointment of inspection bodies by the competent authority

      9. 9.Exceptions

    2. SCHEDULE 2

      OLD PRESSURE RECEPTACLES

      1. 1.Interpretation

      2. 2.Duties on those designing, manufacturing, importing, supplying, modifying or repairing old pressure receptacles

      3. 3.Conformity to approved design standard or specification

      4. 4.Examination of old pressure receptacles by competent or approved persons

      5. 5.Filling of old pressure receptacles

      6. 6.Approved design specification

      7. 7.Modification, repair and re-rating of old pressure receptacles

      8. 8.Additional requirements for old pressure receptacles containing certain dangerous goods not classified as class 2

      9. 9.Approvals by the competent authority

      10. 10.Exceptions

    3. SCHEDULE 3

      COMPETENT AUTHORITY FUNCTIONS

      1. PART 1 APPROVALS BY THE GB COMPETENT AUTHORITY

        1. 1.The references referred to in regulation 27(b) are—

        2. 2.Any approval granted by the GB competent authority by reference...

      2. PART 2 MULTILATERAL AND UNILATERAL APPROVALS BY THE GB COMPETENT AUTHORITY

        1. 3.The references referred to in regulation 28(1) are for–

        2. 4.The references referred to in regulation 28(3) in relation to...

        3. 5.(1) Where the GB competent authority grants approvals under regulation...

      3. PART 3 APPOINTMENT OF PERSONS BY THE GB COMPETENT AUTHORITY

        1. 6.The references referred to in regulation 29(1)(b) are sub-sections 6.2.1.4.1...

      4. PART 4 RECOGNITION OF APPROVALS, TESTS, METHODS, STANDARDS, PROCEDURES ETC. BY THE GB COMPETENT AUTHORITY

        1. 7.The references referred to in regulation 30(1)(b) are—

        2. 8.(1) Where the GB competent authority recognises a quality assurance...

      5. PART 5 IMPOSING OF REQUIREMENTS BY THE GB COMPETENT AUTHORITY

        1. 9.The references referred to in regulation 31(1)(b) are—

        2. 10.(1) Where the GB competent authority imposes requirements by reference...

    4. SCHEDULE 4

      CONFORMITY ASSESSMENT PROCEDURES

      1. ...

        1. Module A—internal production control

        2. The manufacturer must draw up the technical documentation described in...

        3. The technical documentation must enable an assessment to be made...

        4. The manufacturer, or his authorised representative established within the Community,...

        5. The manufacturer must take all measures necessary to ensure that...

        6. . . . . . . . . . ....

        7. . . . . . . . . . ....

        8. . . . . . . . . . ....

        9. . . . . . . . . . ....

        10. . . . . . . . . . ....

        11. . . . . . . . . . ....

        12. Module B—EC type-examination

        13. The application of EC type-examination must be lodged by the...

        14. The technical documentation must enable an assessment to be made...

        15. The notified body must:

        16. .1.examine the technical documentation, verify that the type has been...

        17. .2.perform or have performed the appropriate examinations and necessary tests...

        18. .3.perform or have performed the appropriate examinations and necessary tests...

        19. .4.agree with the applicant the location where the examinations and...

        20. Where the type satisfies the relevant provisions of Part 4...

        21. The applicant must inform the notified body that holds the...

        22. Each notified body must communicate to the member States, the...

        23. The other notified bodies may receive copies of the EC...

        24. The manufacturer, or his authorised representative established within the Community,...

        25. Module B1—EC design examination

        26. The manufacturer, or his authorised representative established within the Community,...

        27. The technical documentation must enable an assessment to be made...

        28. The notified body must:

        29. .1.examine the technical documentation and identify components which have been...

        30. .2.perform the necessary examinations to establish whether the solutions adopted...

        31. .3.perform the necessary examinations to establish whether the relevant provisions...

        32. Where the design meets the relevant provisions of Part 4...

        33. The applicant must inform the notified body that holds the...

        34. Each notified body must communicate to the member States the...

        35. The other notified bodies may on request obtain the relevant...

        36. The manufacturer, or his authorised representative established within the Community,...

        37. Module C1—conformity to type

        38. The manufacturer must take all measures necessary to ensure that...

        39. The manufacturer, or his authorised representative established within the Community,...

        40. Final assessment must be subject to monitoring in the form...

        41. During such visits, the notified body must: — ensure that...

        42. Module D—production quality assurance

        43. The manufacturer must operate an approved quality system for production,...

        44. Quality system

        45. .1.The manufacturer must lodge an application for assessment of his...

        46. 2 The quality system must ensure compliance of the transportable...

        47. .3.The notified body must assess the quality system to determine...

        48. .4.The manufacturer must undertake to fulfil the obligations arising out...

        49. Surveillance under the responsibility of the notified body

        50. .1.The purpose of the surveillance is to make sure that...

        51. .2.The manufacturer must allow the notified body access for inspection...

        52. .3.The notified body must carry out periodic audits to make...

        53. .4.In addition, the notified body may pay unexpected visits to...

        54. The manufacturer must, for a period of 10 years after...

        55. Each notified body must communicate to the member States the...

        56. Module D1—production quality assurance

        57. The manufacturer must draw up the technical documentation described below....

        58. The manufacturer must operate an approved quality system for production,...

        59. Quality system

        60. .1.The manufacturer must lodge an application for assessment of his...

        61. .2.The quality system must ensure compliance of the transportable pressure...

        62. .3.The notified body must assess the quality system to determine...

        63. .4.The manufacturer must undertake to fulfil the obligations arising out...

        64. Surveillance under the responsibility of the notified body

        65. .1.The purpose of surveillance is to make sure that the...

        66. .2.The manufacturer must allow the notified body access for inspection...

        67. .3.The notified body must carry out periodic audits to make...

        68. .4.In addition, the notified body may pay unexpected visits to...

        69. The manufacturer must, for a period of 10 years after...

        70. Each notified body must communicate to the member States the...

        71. Module E—product quality assurance

        72. The manufacturer must operate an approved quality system for production,...

        73. Quality system

        74. .1.The manufacturer must lodge an application for assessment of his...

        75. .2.Under the quality system, each item of transportable pressure equipment...

        76. .3.The notified body must assess the quality system to determine...

        77. .4.The manufacturer must undertake to fulfil the obligations arising out...

        78. Surveillance under the responsibility of the notified body

        79. .1.The purpose of surveillance is to make sure that the...

        80. .2.The manufacturer must allow the notified body access for inspection...

        81. .3.The notified body must carry out periodic audits to make...

        82. .4.In addition, the notified body may pay unexpected visits to...

        83. The manufacturer must, for a period of 10 years after...

        84. Each notified body must communicate to the member States the...

        85. Module E1—production quality assurance

        86. The manufacturer must draw up the technical documentation described below....

        87. The manufacturer must operate an approved quality system for the...

        88. Quality system

        89. .1.The manufacturer must lodge an application for assessment of his...

        90. .2.Under the quality system, each item of transportable pressure equipment...

        91. .3.The notified body must assess the quality system to determine...

        92. .4.The manufacturer must undertake to discharge the obligations arising from...

        93. Surveillance under the responsibility of the notified body

        94. .1.The purpose of surveillance is to make sure that the...

        95. .2.The manufacturer must allow the notified body access for inspection...

        96. .3.The notified body must carry out periodic audits to make...

        97. .4.In addition, the notified body may pay unexpected visits to...

        98. The manufacturer must, for a period of 10 years after...

        99. Each notified body must communicate to the member States the...

        100. Module F—product verification

        101. The manufacturer must take all measures necessary to ensure that...

        102. The notified body must perform the appropriate examinations and tests...

        103. Verification by examination and testing of each item of transportable...

        104. .1.Each item of transportable pressure equipment must be individually examined...

        105. .2.The notified body must affix its identification number or have...

        106. .3.The manufacturer, or his authorised representative established within the Community,...

        107. Module G—EC unit verification

        108. The manufacturer must apply to a notified body of his...

        109. The technical documentation must enable the conformity of the transportable...

        110. The notified body must examine the design and construction of...

        111. .1.The notified body must affix its identification number or have...

        112. .2.The manufacturer, or his authorised representative established within the Community,...

        113. Module H—full quality assurance

        114. The manufacturer must implement an approved quality system for design,...

        115. Quality system

        116. .1.The manufacturer must lodge an application for assessment of his...

        117. .2.The quality system must ensure compliance of the transportable pressure...

        118. .3.The notified body must assess the quality system to determine...

        119. .4.The manufacturer must undertake to fulfil the obligations arising out...

        120. Surveillance under the responsibility of the notified body

        121. .1.The purpose of this surveillance is to make sure that...

        122. .2.The manufacturer must allow the notified body access for inspection...

        123. .3.The notified body must carry out periodic audits to make...

        124. .4.In addition, the notified body may pay unexpected visits to...

        125. The manufacturer must, for a period of 10 years after...

        126. Each notified body must communicate to the other member States...

        127. Module H1—full quality assurance with design examination and special surveillance of the final test

        128. Final assessment is subject to increased surveillance in the form...

    5. SCHEDULE 5

      MODULES TO BE FOLLOWED FOR CONFORMITY ASSESSMENT

      1. ...

        1. . . . . . . . . . ....

        2. Transportable pressure equipment must be subject, at the choice of...

        3. As part of the quality assurance procedures, the notified body...

    6. SCHEDULE 6

      CONFORMITY REASSESSMENT PROCEDURE

      1. ...

        1. This procedure describes the method for ensuring that transportable pressure...

        2. The owner must make available to a notified body information...

        3. The notified body must check whether transportable pressure equipment which...

        4. If the results of the above checks are satisfactory, the...

        5. For equipment manufactured in series, including their valves and other...

    7. SCHEDULE 7

      PERIODIC INSPECTION PROCEDURES

      1. ...

        1. Module 1—periodic inspection of products

        2. To meet the requirements referred to in paragraph 1 the...

        3. The notified body or approved body must perform the appropriate...

        4. .1.All transportable pressure equipment must be examined individually and appropriate...

        5. .2.The notified body or approved body must affix, or have...

        6. .3.The owner or his authorised representative established in the Community...

        7. Module 2—periodic inspection through quality assurance

        8. The owner or his authorised representative established within the Community...

        9. Quality system

        10. .1.The owner or his authorised representative established in the Community...

        11. .2.Under the quality system, each item of transportable pressure equipment...

        12. .3.The notified body must assess the quality system to determine...

        13. .4.The owner or his authorised representative established in the Community...

        14. Surveillance under the responsibility of the notified body

        15. .1.The purpose of surveillance is to make sure that the...

        16. .2.The owner or his authorised representative established in the Community...

        17. .3.The notified body must carry out periodic audits to make...

        18. .4.In addition, the notified body may pay unannounced visits to...

        19. The owner or his authorised representative established in the Community...

    8. SCHEDULE 8

      CONFORMITY MARKING

      1. . . . . . . . . . ....

      2. . . . . . . . . . ....

      3. . . . . . . . . . ....

      4. . . . . . . . . . ....

      5. . . . . . . . . . ....

    9. SCHEDULE 9

      PLACARDS, MARKS AND PLATE MARKINGS FOR CARRIAGE WITHIN GREAT BRITAIN

      1. PART 1 CARRIAGE OF GOODS BY ROAD

        1. 1.Where orange-coloured plates bearing a HIN are required to be...

        2. 2.Subject to paragraphs 3 and 6, where a battery-vehicle, tank-vehicle...

        3. 3.Subject to paragraphs 4 and 6, where more than one...

        4. 4.Subject to paragraph 6, where more than one dangerous good...

        5. 5.(1) Subject to sub-paragraph (2), where dangerous goods are being...

        6. 6.(1) The information required to be displayed on placards and...

        7. Hazard warning panel

          1. . . . . . . . . . ....

      2. PART 2 CARRIAGE OF GOODS BY RAIL

        1. 7.Where orange-coloured plates bearing a HIN are required to be...

        2. 8.Where dangerous goods are being carried in tanks, a telephone...

        3. 9.(1) The information required to be displayed on placards and...

    10. SCHEDULE 10

      AMENDMENTS TO THE HEALTH AND SAFETY (FEES) REGULATIONS 2004

      1. 1.The Health and Safety (Fees) Regulations 2004 shall be amended...

      2. 2.For regulations 12 to 14 substitute— Fees for certificates and...

      3. 3.For Schedule 10 substitute— SCHEDULE 10 FEE FOR DRIVER TRAINING...

      4. 4.For Schedule 11 substitute— SCHEDULE 11 FEES FOR APPLICATIONS FOR...

      5. 5.For Schedule 12 substitute— SCHEDULE 12 FEE FOR SAFETY ADVISER...

    11. SCHEDULE 11

      AMENDMENTS TO THE CHEMICALS (HAZARD INFORMATION AND PACKAGING FOR SUPPLY) REGULATIONS 2002

      1. 1.The Chemicals (Hazard Information and Packaging for Supply) Regulations 2002...

      2. 2.After regulation 8 (labelling of dangerous substances and dangerous preparations)...

    12. SCHEDULE 12

      AMENDMENTS TO THE CLASSIFICATION AND LABELLING OF EXPLOSIVES REGULATIONS 1983

      1. 1.The Classification and Labelling of Explosives Regulations 1983 shall be...

      2. 2.In regulation 2(1) (interpretation)— (1) omit the definition of “class...

      3. 3.In regulation 3 (classification and labelling of explosive articles and...

      4. 4.For regulation 6 (labelling of an article, substance or combination)...

      5. 5.Regulations 7 (labelling of an article, substance or combination not...

      6. 6.In regulation 10 (labelling generally), in paragraph (1), for “6,...

      7. 7.In regulation 12A, in paragraph (a) for “3(2)(b), 6 or...

      8. 8.Omit Schedules 1 and 2.

      9. 9.In Schedule 3 (labels)— (1) omit paragraphs 1 to 11;...

    13. SCHEDULE 13

      CONSEQUENTIAL AMENDMENTS

      1. 1.Amendment to the Petroleum (Consolidation) Act 1928

      2. 2.Amendment to the Compressed Acetylene (Importation) Regulations 1978

      3. 3.Amendments to the Dangerous Substances in Harbour Areas Regulations 1987

      4. 4.Amendment to the Dangerous Substances (Notification and Marking of Sites) Regulations 1990

      5. 5.Amendment to the Control of Explosives Regulations 1991

      6. 6.Amendment to the Coal and Other Safety-Lamp Mines (Explosives) Regulations 1993

      7. 7.Amendment to the Notification of New Substances Regulations 1993

      8. 8.Amendments to the Reporting of Injuries, Diseases and Dangerous Occurrences Regulations 1995

      9. 9.Amendment to the Health and Safety (Safety Signs and Signals) Regulations 1996

      10. 10.Amendments to the Pressure Systems Safety Regulations 2000

      11. 11.Amendments to the Radiation (Emergency Peparedness and Public Information) Regulations 2001

      12. 12.Amendments to the Control of Asbestos at Work Regulations 2002

      13. 13.Amendment to the Contol of Lead at Work Regulations 2002

      14. 14.Amendment to the Control of Substances Hazardous to Health Regulations 2002

      15. 15.Amendment to the Dangerous Substances and Explosive Atmospheres Regulations 2002

    14. SCHEDULE 14

      REVOCATIONS

  9. Explanatory Note

Back to top

Options/Help

Print Options

You have chosen to open The Whole Instrument

The Whole Instrument you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.

Would you like to continue?

You have chosen to open The Whole Instrument as a PDF

The Whole Instrument you have selected contains over 200 provisions and might take some time to download.

Would you like to continue?

You have chosen to open the Whole Instrument

The Whole Instrument you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.

Would you like to continue?

You have chosen to open Schedules only

The Schedules you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.

Would you like to continue?

Close

Legislation is available in different versions:

Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.

Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.

Close

Opening Options

Different options to open legislation in order to view more content on screen at once

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as enacted version that was used for the print copy
  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources
Close

Timeline of Changes

This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.

Close

More Resources

Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as made version that was used for the print copy
  • correction slips

Click 'View More' or select 'More Resources' tab for additional information including:

  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • links to related legislation and further information resources