xmlns:atom="http://www.w3.org/2005/Atom" xmlns:atom="http://www.w3.org/2005/Atom"

SCHEDULE 2N.I.F1... MODEL TRAIN DRIVING LICENCE AND F1... COMPLEMENTARY TRAIN DRIVING CERTIFICATE

(This Schedule substantially reproduces the provisions of Annex I to the Directive)N.I.

CHARACTERISTICS OF THE LICENCEN.I.

1.  The physical characteristics of the train driving licence must be in conformity with ISO standards 7810:2003 and 7816-1:1998(1).

The card must be made of polycarbonate.

The methods for verifying the characteristics of train driving licences to ensure that they are consistent with international standards must comply with ISO standard 10373-1:2006(2).

Commencement Information

I1Sch. 2 para. 1 in force at 31.12.2010, see reg. 41(5)

CONTENTS OF THE LICENCEN.I.

2.  The front of the licence must contain—

(a)the words “Train driving licence” printed in large type F2...,

(b)the words “United Kingdom”,

F3(c). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(d)information specific to the licence issued, numbered as follows—

(i)the surname of the holder,

(ii)other name(s) of the holder,

(iii)the date and place of birth of the holder,

(iv)the following details—

(v)the number of the licence giving access to data in the register referred to in regulation 22,

(vi)a photograph of the holder,

(vii)the signature of the holder,

(viii)the permanent place of residence or postal address of the holder (optional)

F4(e). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

F5(f). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(g)additional information, or medical restrictions for use imposed by the Department in accordance with Schedule 1, in code form.

F6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

CERTIFICATEN.I.

3.  The certificate must contain—

(a)the surname of the holder,

(b)other name(s) of the holder,

(c)the date and place of birth of the holder,

(d)the date of issue of the certificate,

(e)the date of expiry of the certificate,

(f)the name of the issuing railway undertaking ,

(g)the reference number assigned to the holder by the issuing railway undertaking (optional)

(h)the number of the certificate giving access to data in the register referred to in regulation 23,

(i)a photograph of the holder,

(j)the signature of the holder,

(k)the permanent place of residence or postal address of the holder (optional)

(l)the name and address of the railway undertaking for which the train driver is authorised to drive trains,

(m)the category in which the holder is entitled to drive,

(n)the type of rolling stock which the holder is entitled to drive,

(o)the infrastructures on which the holder is authorised to drive,

(p)any additional information or restrictions,

(q)language skills.

Commencement Information

I3Sch. 2 para. 3 in force at 31.12.2010, see reg. 41(5)

MINIMUM DATA CONTAINED IN REGISTERS OF TRAIN DRIVING LICENCES AND TRAIN DRIVING CERTIFICATESN.I.

4.—(a) Data relating to the licence—

(b)Data relating to the certificate—

Commencement Information

I4Sch. 2 para. 4 in force at 31.12.2010, see reg. 41(5)

(1)

ISO standards are published in Geneva by the International Organisation for Standardisation. ISO standard 7810:2003 — identification cards — physical characteristics — edition 3 was published on 31 October 2003 and 7816-1:1998 — identification cards — integrated circuit(s) cards with contacts — Part 1 — physical characteristics — edition 1 was published on 8 October 1998.

(2)

ISO standard 10373-1:2006 — identification cards — test methods — Part 1 — General Characteristics — edition 2 was published on 26 April 2006.