xmlns:atom="http://www.w3.org/2005/Atom"

Regulation 3

SCHEDULE 1

PART ICRITERIA FOR IDENTIFICATION OF SENSITIVE AREAS

A water body must be identified as a sensitive area if it falls into one of the following groups:

(a)natural freshwater lakes, other freshwater bodies, estuaries and coastal waters which are found to be eutrophic or which in the near future may become eutrophic if protective action is not taken.

(b)surface freshwaters intended for the abstraction of drinking water which could contain more than the concentration of nitrate laid down under the relevant provisions of Council Directive 75/440/EEC of 16th June 1975 concerning the quality required of surface water intended for the abstraction of drinking water in the Member States(1) if action is not taken;

(c)areas where further treatment than secondary or equivalent treatment is necessary to fulfil Council Directives.

PART IICRITERIA FOR IDENTIFICATION OF HIGH NATURAL DISPERSION AREAS

A marine water body or area can be identified as a high natural dispersion area if the discharge of waste water does not adversely affect the environment as a result of morphology, hydrology or specific hydraulic conditions which exist in that area.

When identifying high natural dispersion areas, the Secretary of State shall take into account the risk that the discharged load may be transferred to adjacent areas where it can cause detrimental environmental effects. The Secretary of State shall recognise the presence of sensitive areas outside England and Wales.

The following elements shall be taken into consideration when identifying high natural dispersion areas:

(1)

OJ No. L 194, 25.7.75, p. 26; as amended by Directive 79/869/EEC (OJ No. L 271, 29.10.79, p. 44).