- Latest available (Revised)
- Original (As made)
This is the original version (as it was originally made).
4. Verification by examination and testing of each item of pressure equipment
4.1. Each item of pressure equipment must be individually examined and must undergo appropriate examinations and tests as set out in the relevant standard(s) referred to in Article 5 or equivalent examinations and tests in order to verify that it conforms to the type and the requirements of the Directive which apply to it.
In particular, the notified body must:
verify that the personnel undertaking the permanent joining of parts and the non-destructive tests are qualified or approved in accordance with sections 3.1.2 and 3.1.3 of Annex I,
verify the certificate issued by the materials manufacturer in accordance with section 4.3 of Annex I,
carry out or have carried out the final inspection and proof test referred to in section 3.2 of Annex I and examine the safety devices, if applicable.
4.2. The notified body must affix its identification number or have it affixed to each item of pressure equipment and draw up a written certificate of conformity relating to the tests carried out.
4.3. The manufacturer, or his authorised representative established within the Community, must ensure that the certificates of conformity issued by the notified body can be made available on request.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include: