- Latest available (Revised)
- Original (As made)
This is the original version (as it was originally made).
Regulation 15
For the labelling and identification of vehicle plastic components and materials having a weight of more than 100 grams, the following nomenclature applies:
ISO 1043-1 Plastics—symbols and abbreviated terms. Part 1: Basic polymers and their special characteristics.
ISO 1043-2 Plastics—symbols and abbreviated terms. Part 2: Fillers and reinforcing materials.
ISO 11469 Plastics—Generic identification and marking of plastic products.
For the labelling and identification of vehicle elastomer components and materials having a weight of more than 200 grams, the following nomenclature applies:
ISO 1629 Rubbers and latices—Nomenclature. This shall not apply to the labelling of tyres.
The symbols “<” or “>” used in the ISO standards, can be substituted by brackets.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: