Search Legislation

The Ecodesign for Energy-Using Products Regulations 2007

Status:

This is the original version (as it was originally made).

  1. Introductory Text

  2. PART 1 Introduction and interpretation

    1. 1.Citation and commencement

    2. 2.Interpretation

  3. PART 2 Restriction on listed products, conformity assessments, declarations of conformity and the CE conformity marking

    1. 3.Restriction on listed products

    2. 4.Conformity assessments, declarations of conformity and the CE conformity marking

    3. 5.Authorised representatives and importers

    4. 6.Displays of listed products not restricted

  4. PART 3 Presumption of conformity, non-conformity, misleading markings and documentation

    1. 7.Presumption of conformity

    2. 8.Non-conformity

    3. 9.Misleading markings

    4. 10.Documentation for inspection

  5. PART 4 Notified bodies

    1. 11.Criteria to be met by notified bodies and approvals

    2. 12.Function of notified bodies

    3. 13.Obligations and powers of notified bodies

    4. 14.Power to charge fees

    5. 15.Appeals against non-conformity notices

    6. 16.Non-conformity notices

    7. 17.Information to be supplied to other notified bodies

  6. PART 5 Enforcement

    1. 18.Enforcement

    2. 19.Proceedings before a civil court

    3. 20.Powers of an enforcing authority and authorisation

    4. 21.Appeals against enforcement notices

    5. 22.Notification of enforcement notices

  7. PART 6 Offences and penalties

    1. 23.Offences and penalties in respect of regulations 3 to 5 and 8 to 10

    2. 24.Other offences and penalties

    3. 25.Commencement of summary proceedings

    4. 26.Bodies corporate

    5. 27.Remediation orders

  8. PART 7 Revocations

    1. 28.Revocations

  9. Signature

    1. SCHEDULE 1

      Listed products

      1. PART 1 Listed products and implementing measures

        1. 1.“Listed product” means— (a) a boiler or an appliance;

        2. 2.“Implementing measure” in relation to— (a) a boiler or an...

      2. PART 2 Boilers and appliances

        1. 1.The following definitions have effect— (a) “a boiler” means the...

        2. 2.The following are not within the definition in paragraph 1—...

      3. PART 3 Refrigerator appliances

        1. 1.“A refrigerator appliance” means— (a) a refrigerator;

        2. 2.The following are not within the definition in paragraph 1—...

      4. PART 4 Ballasts for fluorescent lighting

        1. 1.“A ballast for fluorescent lighting” means a ballast—

        2. 2.The following are not within the definition in paragraph 1—...

    2. SCHEDULE 2

      Product requirements

      1. PART 1 Introduction

        1. 1.This Schedule sets out in relation to a listed product...

      2. PART 2 Boilers and appliances

        1. 1.A boiler or an appliance must comply with the useful...

        2. 2.The table referred to in paragraph 1— Useful efficiency requirements...

        3. 3.A boiler or an appliance with a dual function of—...

        4. 4.A boiler which is— (a) a back-boiler; or

      3. PART 3 Refrigerator appliances

        1. 1.If a refrigerator appliance is within categories 1 to 9...

        2. 2.The table referred to in paragraph 1— Table 1 Requirements...

        3. 3.If a refrigerator appliance— (a) has more than 2 doors;...

        4. 4.Table 2 referred to in paragraph 3— Table 2 Requirements...

        5. 5.The categories 1 to 7 referred to in column 2...

        6. 6.The following have effect in respect of tables 1 and...

        7. 7.For the purposes of paragraph 6— Vadj is the value...

        8. 8.The following table defines the co-efficients Xc and Yc referred...

        9. 9.For the purposes of this Part, a manufacturer must establish...

      4. PART 4 Ballasts for fluorescent lighting

        1. 1.A ballast for fluorescent lighting must be allocated to a...

        2. 2.In respect of— (a) the category of ballast shown in...

        3. 3.Table 1 referred to in paragraph 1— Table 1 Categories...

        4. 4.Table 2 referred to in paragraph 2— Table 2 Maximum...

        5. 5.For a ballast for fluorescent lighting designed for a lamp...

        6. 6.For the purposes of this Part, a manufacturer must establish...

    3. SCHEDULE 3

      Conformity assessment procedures applicable to a listed product

      1. PART 1 Introduction

        1. 1.This Schedule sets out the conformity assessment procedure or procedures...

        2. 2.“The testing and checking process” has the meaning given in...

        3. 3.References to a manufacturer include— (a) an authorised representative; or...

      2. PART 2 Boilers and appliances

        1. 1.The conformity assessment procedures applicable to a boiler or an...

        2. 2.The following additional technical documentation must form part of the...

        3. 3.A representative sample of the boiler or appliance, and such...

      3. PART 3 Refrigerator appliances

        1. 1.The conformity assessment procedures applicable to a refrigerator appliance are—...

        2. 2.The following additional technical documentation must form part of the...

        3. 3.The electricity consumption procedure referred to in paragraph 1 means—...

        4. 4.For the purposes of paragraph 3, a manufacturer must establish...

      4. PART 4 Ballasts for fluorescent lighting

        1. 1.The conformity assessment procedure applicable to a ballast for fluorescent...

        2. 2.The following additional technical documentation must form part of the...

    4. SCHEDULE 4

      Modules for conformity assessment

      1. PART 1 General

        1. CHAPTER 1 Miscellaneous

          1. 1.A notified body referred to in this Schedule means a...

          2. 2.In the remaining provisions of this Schedule, references to a...

          3. 3.“Equivalent standards” means standards equivalent to the harmonised standards, including...

          4. 4.A notified body must carry out tests or examinations—

          5. 5.A notified body must, under module B—

          6. 6.A notified body must ensure that— (a) in module D,...

          7. 7.Expressions used in this Schedule which are used in Council...

        2. CHAPTER 2 General technical documentation

          1. 8.The general technical documentation means the documentation necessary to enable...

          2. 9.The provision of the documentation under paragraph 8 may be...

        3. CHAPTER 3 Testing and checking process

          1. 10.The testing and checking process means the notified body carries...

          2. 11.If the testing and checking process demonstrates that a listed...

        4. CHAPTER 4 Notified bodies and non-conformity

          1. 12.Where a notified body determines that a listed product does...

          2. 13.If— (a) no such further information or steps are possible;...

          3. 14.“A non-conformity notice” means a written notice that—

          4. 15.Where a notified body has given a non-conformity notice and...

      2. PART 2 Module A (internal production control)

        1. 1.The manufacturer must establish the general technical documentation.

        2. 2.The general technical documentation must be kept with the declaration...

        3. 3.The manufacturer must take all necessary measures to ensure that...

      3. PART 3 Module B (EC type-examination)

        1. 1.The manufacturer must make a written application to a notified...

        2. 2.The application must include— (a) the name and address of...

        3. 3.The notified body must— (a) examine the general technical documentation;...

        4. 4.If a notified body is satisfied that the type conforms...

        5. 5.An EC type-examination certificate must be in writing and include—...

        6. 6.If a manufacturer makes modifications to a listed product that...

        7. 7.Where an application is made for an additional approval to...

        8. 8.Relevant documentation under regulation 10 includes— (a) the EC type-examination...

      4. PART 4 Module C (conformity to type)

        1. 1.The manufacturer must take all necessary measures to ensure that...

      5. PART 5 Module D (production quality assurance)

        1. 1.The manufacturer must operate an approved quality system in respect...

        2. 2.A quality system is approved if it is approved by...

        3. 3.The matters referred to in paragraph 2(c)(ii) are that the...

        4. 4.A manufacturer must apply for approval of his quality system...

        5. 5.Where a notified body receives an application in accordance with...

        6. 6.An approval under paragraph 5 must be in writing and...

        7. 7.If a manufacturer intends to modify the approved quality system—...

        8. 8.If the notified body determines that a re-assessment is required,...

        9. 9.A notified body must carry out— (a) periodic audits of...

        10. 10.A notified body must inform the manufacturer of the results...

        11. 11.In relation to paragraph 9, a manufacturer must—

        12. 12.Relevant documentation under regulation 10 includes— (a) the documentation concerning...

      6. PART 6 Module E (product quality assurance)

        1. 1.The manufacturer must operate an approved quality system in respect...

        2. 2.Paragraphs 2 to 12 of module D (production quality assurance)...

    5. SCHEDULE 5

      Declaration of conformity

      1. 1.A person who makes a declaration of conformity declares that...

      2. 2.A declaration of conformity— (a) must be in writing; and...

      3. 3.A declaration of conformity must include— (a) the name and...

      4. 4.A declaration of conformity must include the title of the...

    6. SCHEDULE 6

      CE conformity marking

      1. PART 1 General requirements

        1. 1.A CE conformity marking must be in the following form—...

        2. 2.A CE conformity marking must have a height of at...

        3. 3.Subject to paragraph 2, if a CE conformity marking is...

      2. PART 2 Additional requirements

        1. 1.Where a CE conformity marking is affixed in relation to...

        2. 2.Where a ballast for fluorescent lighting is placed on the...

    7. SCHEDULE 7

      Criteria to be met by notified bodies

      1. 1.A notified body must act— (a) with the highest degree...

      2. 2.A notified body must possess the necessary—

      3. 3.The staff of a notified body must be impartial and...

      4. 4.A notified body must ensure that any other person it...

    8. SCHEDULE 8

      Appeals

      1. 1.An appeal must be made within two months of the...

      2. 2.In respect of— (a) a non-conformity notice, the parties to...

      3. 3.Where an appeal is brought, this does not suspend the...

      4. 4.On the determination of an appeal, the appeal body may—...

      5. 5.An appeal body may deal with an appeal in such...

    9. SCHEDULE 9

      Powers of enforcing authorities

      1. PART 1 Powers of entry

        1. 1.An authorised person— (a) may enter any premises for the...

        2. 2.The power may be exercised— (a) at all reasonable hours;...

        3. 3.An authorised person may take with him—

        4. 4.A person entering unoccupied premises must leave them as effectively...

        5. 5.Admission to any premises used only as a private dwelling-house...

        6. 6.The reference to “premises” in relation to powers of entry...

      2. PART 2 Warrants

        1. 1.If a justice of the peace, on sworn information in...

        2. 2.The conditions referred to in paragraph 1—

        3. 3.A warrant continues in force for one month.

        4. 4.Reference to a justice of the peace—

      3. PART 3 Powers on entry

        1. 1.An authorised person who has entered any premises in accordance...

        2. 2.An authorised person must avoid destruction or damage to the...

        3. 3.If a person claims to be entitled to compensation in...

      4. PART 4 Test purchases and testing

        1. 1.An authorised person may purchase any article or substance to...

        2. 2.An enforcing authority must comply with paragraph 3 if—

        3. 3.Where paragraph 2 applies, an enforcing authority must if requested...

        4. 4.An article or substance includes a listed product or any...

      5. PART 5 Notices

        1. 1.The enforcing authority may, by notice served on any person,...

        2. 2.If the enforcing authority is of the opinion that a...

        3. 3.An enforcement notice must— (a) state that the enforcing authority...

        4. 4.An enforcement notice may require that a listed product, or...

        5. 5.The enforcing authority may withdraw an enforcement notice at any...

        6. 6.If a person fails to comply with an enforcement notice,...

    10. SCHEDULE 10

      Revocations

  10. Explanatory Note

Back to top

Options/Help

Print Options

Close

Legislation is available in different versions:

Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.

Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.

Close

Opening Options

Different options to open legislation in order to view more content on screen at once

Close

Explanatory Memorandum

Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as enacted version that was used for the print copy
  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources
Close

More Resources

Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as made version that was used for the print copy
  • correction slips

Click 'View More' or select 'More Resources' tab for additional information including:

  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • links to related legislation and further information resources