Search Legislation

The London Gateway Port Harbour Empowerment Order 2008

Status:

This is the original version (as it was originally made).

Article 10(1)

SCHEDULE 1WORKS

1.  In this Schedule—

(a)“Chainage Reference” means the relevant chainage reference shown on the deposited plans and the deposited sections; and

(b)“Coordinates Reference” means the relevant coordinates reference shown on the deposited plans and the deposited sections and set out in the table below—

Coordinates ReferenceEastingsNorthings
1571333181206
2572665181493
3571404180880
4572735181170
5572225181405
6574167181463
7571415180832
8574164181431
9570916181515
10572210181611
11572044181600
12574146181493
13574326181611
14574349181576
15570878181557
16571015181522
17573568181793
18574161181501
19573573181782
20571366180822
21571288181173
22571311181235
23570788181576
24573565181812
25570788181550
26571101180866
27571143180670
28571436180734
29571343180918
30574391181480

2.  The works referred to in article 10(1) are—

Work No. 1 — Improvement works to the A13/A128 Southfields Junction comprising a road (1400 metres in length) commencing at a point 650 metres west of the existing A128 Southfields Junction passing north-eastwards within a cutting, passing under an existing bridge and terminating 530 metres east of Barrington’s Farm and incorporating service crossings. The improved A13/A128 Southfields Junction will incorporate a circulatory road which will cross the road described in this work on bridges replacing the existing bridges and will incorporate slip roads and bell-mouth junctions enabling vehicular access to and egress from the improved A13/A128 Southfields Junction to and from the road described in this work, the A1013 Stanford Road west, the A1013 Stanford Road east, the A128 Brentwood Road north and the A128 Brentwood Road south.

Work No. 2 — Improvement works to the A13 comprising a road (1775 metres in length) commencing at the termination point of Work No. 1 passing north-eastwards for 300 metres within a cutting and terminating east of the existing cycleway FP48. The works will incorporate service crossings, areas for temporary or ancillary works, bell-mouth junctions with the A13 eastbound and A13 westbound service areas, and a footpath commencing at the point where the works join the existing footpath FP81 and terminating at a point 150 metres east of the A13 eastern service area. The road will be crossed by two new bridge works, the first carrying the existing footpath FP12 from a point 340 metres east of the eastern boundary of the A13 westbound service area, passing northwards over the road before terminating at a point 135 metres east of the A13 eastbound service area, and the second carrying the existing cycleway FP48 from a point 35 metres north-west of the A1013 Stanford Road, passing north-westwards over the road before terminating at a point 105 metres north-east of the property known as Talford.

Work No. 3 — Improvement works to the A13/A1014 Junction comprising a road (1235 metres in length along Chainage Reference A) commencing at the termination point of Work No. 2, passing north-eastwards and terminating adjacent to a track at a point 300 metres north-east of the A1014 Manorway Junction at Stanford-le-Hope, and a road (800 metres in length along Chainage Reference B) commencing at a point 350 metres north-west of The Manorway rail overbridge, passing south-eastwards and terminating at the Southend Road overbridge. The improved A13/A1014 Junction will incorporate a circulatory road which will cross the roads described in this work on bridges, and will incorporate slip roads and bell-mouth junctions enabling vehicular access to and egress from the A13/A1014 Junction to and from the road described in this work, the A1013 Stanford Road and the B1007. This work will also incorporate service crossings, a culvert extension and areas for temporary or ancillary works.

Work No. 4 — Improvement works to the A1014 comprising a road (750 metres in length) commencing at termination point of Work No. 3, Chainage Reference B (the Southend Road overbridge), passing eastwards and terminating immediately west of the Abbotts Hall Chase A1014 underpass, and incorporating service crossings and a pedestrian crossing. This work will also incorporate a footpath commencing at a point 100 metres west of the existing western A1014 subway, passing generally eastwards and terminating at a point 20 metres east of the existing western A1014 subway.

Work No. 5 — Improvements to the A1014 Sorrells Roundabout comprising a road (667 metres in length along Chainage Reference A) commencing at the termination point of Work No. 4, passing north-eastwards and terminating at a point 300 metres north-east of the existing A1014 Sorrells Roundabout, and a road (300 metres in length along Chainage Reference B) commencing at a point south of No. 231 Corringham Road, passing southwards and terminating at a point 250 metres north of High Road. The improved A1014 Sorrells Roundabout will incorporate a circulatory road which will incorporate the roads described in this work and slip roads and bell-mouth junctions enabling vehicular access to and egress from the A1014 Sorrells Roundabout to and from the roads described in this work, The Sorrells and Corringham Road. This work will also incorporate a pedestrian crossing, service crossings and areas for temporary or ancillary works.

Work No. 6 — Road access into the port development comprising a road (4029 metres in length along Chainage Reference A) commencing at the termination point of Work No. 5, Chainage Reference B, passing south-eastwards and then eastwards, crossing the road described in Work No. 8, crossing the Thameshaven Branch Line and sidings on the level crossing described in Work No. 7 and terminating at a point 10 metres south of the existing Thameshaven Branch Line. A road (520 metres in length along Chainage Reference B) commencing at a junction with the first road described in this work at a point 425 metres south-west of the existing bitumen plant, passing southwards and then south-eastwards, crossing the realigned Thameshaven Branch Line and sidings (Works Nos. 9 and 10) on a bridge or a level crossing and terminating within the area of jurisdiction, and a road (450 metres in length along Chainage Reference C) commencing at a junction with the first road described in this work at a point 230 metres east of the existing refinery control room, passing southwards and then south-eastwards, crossing the realigned Thameshaven Branch Line and sidings (Works Nos. 9 and 10) on a bridge before turning eastwards and terminating within the area of jurisdiction. This work will incorporate road crossings, service crossings, culvert crossings, pedestrian crossings and level crossings. This work also includes a footpath (1615 metres in length along Chainage Reference D) commencing at a point 70 metres west of the existing refinery electrical intake substation, passing northwards across the first road described in this work, then following existing field boundaries to the end of the existing Great Garlands farm track, before terminating at a point 195 metres north-west of the existing refinery Gate 1 access road.

Work No. 7 — A road (1013 metres in length) commencing at the existing Gate 3 access to the refinery, passing generally southwards and terminating at a point 10 metres south of the existing eastern level crossing of the Thameshaven Branch Line. The road will cross the first road described in Work No. 6, and will incorporate a level crossing of the Thameshaven Branch Line and service crossings.

Work No. 8 — A road (993 metres in length) commencing at a point 260 metres south-west of the existing bitumen plant, passing northwards and crossing the first road described in Work No. 6 and terminating at the existing Gate 1 access.

Work No. 9 — A double track railway (5330 metres in length) commencing at a point 60 metres north of the existing junction of the Thameshaven Branch Line with the London Tilbury and Southend Railway mainline, passing northwards, turning eastwards and crossing over a new Mucking Creek railway bridge. The railway continues eastwards along the existing railway corridor, crossing over a new Wharf Road railway bridge and enters the area of jurisdiction north of the existing surface water outfall at Reactor Quay. The railway continues eastwards within the area of jurisdiction and terminates at a point east of the existing eastern level crossing at the intersection with the existing Thameshaven Branch Line. The railway will incorporate vehicular and pedestrian level crossings, service crossings, culvert crossings, surface water outfall crossings and protective works to a pylon situated 105 metres north-east of the existing Stanhope Industrial Park water tower. This work also includes the diversion of two foul mains 25 metres south of the existing Mucking Creek railway bridge and a new foul pumping main commencing at the pumping chamber in the Anglian Water sewage pumping station, passing eastwards to the northern edge of Stanhope Industrial Park access road, crossing under the railway described in this work and terminating 50 metres south-east of the existing refinery electrical intake substation.

Work No. 10 — A railway (3465 metres in length) consisting of multiple loading sidings, reception sidings, loco-shunting sidings and crippled wagon sidings, commencing at the western end by junctions with the double track railway described in Work No. 9, passing eastwards, incorporating junctions with the railway described in Work No. 9 and terminating at buffers.

Work No. 11 — This work may be carried out within an area bounded to the north by a line commencing at Coordinates Reference 1, passing north-eastwards along the existing shore line through Coordinates Reference 5 to Coordinates Reference 2, to the south by a line commencing at Coordinates Reference 3, passing north-eastwards and terminating at Coordinates Reference 4, to the west by a line commencing at Coordinates Reference 3, passing north-westwards and terminating at the existing shoreline at Coordinates Reference 1 and to the east by a line commencing at Coordinates Reference 4, passing north-westwards and terminating at the existing shoreline at Coordinates Reference 2, as shown on the deposited plans: Demolition of any structures, including jetties and other berthing structures; reclamation of an area of the river with a bund in front for the construction of port facilities and infrastructure; port surfacing and construction of a quay wall, and other above ground works, including associated storage areas, construction of buildings and supporting facilities, drainage, ducting etc.; on reclaimed or surfaced areas, temporary stockpiles for construction materials; and temporary offices and workshops, including concrete batching plants and aggregate processing plants.

Work No. 12 — This work may be carried out within an area bounded to the north by the existing shore line commencing at Coordinates Reference 5, passing generally eastwards and terminating at Coordinates Reference 6, to the south by a line commencing at Coordinates Reference 7, passing north-eastwards and terminating at Coordinates Reference 8, to the west by a line commencing at Coordinates Reference 7, passing north-westwards along the boundary of Work No. 17 to the boundary of Work No. 11 at Coordinates Reference 3, following the southern boundary of Work No. 11 north-eastwards to Coordinates Reference 4, north-westwards to Coordinates Reference 2 and south-westwards to the existing shoreline at grid reference Coordinates Reference 5, and bounded to the east by a line commencing at grid reference Coordinates Reference 8, passing north-westwards and terminating at the existing shoreline at Coordinates Reference 6, as shown on the deposited plans: Demolition of any structures, including jetties and other berthing structures; reclamation of an area of the river with a bund in front for the construction of port facilities and infrastructure; port surfacing and construction of a quay wall or jetty, and other above ground works, including associated storage areas, construction of buildings and supporting facilities, drainage, ducting, etc.

Work No. 13 — This work may be carried out within an area bounded to the north by a line commencing at Coordinates Reference 9, passing eastwards to Coordinates Reference 16, continuing generally eastwards following the southern boundary of Work No. 18 to Coordinates Reference 11, and then continuing eastwards and terminating at Coordinates Reference 10, and bounded to the west by the existing shoreline and to the south by the existing shoreline and Works Nos. 11 and 17, and to the east by a line commencing at Coordinates Reference 5, passing northwards and terminating at Coordinates Reference 10, as shown on the deposited plans: Filling of land for the construction of port facilities and infrastructure; port surfacing and construction of a retaining wall and other above ground works, including associated storage areas, construction of buildings and supporting facilities, drainage, ducting, etc.; construction of general civil works, earthworks, drainage, ducting, etc. in connection with the construction of Works Nos. 9 and 10; and temporary stockpile areas for construction materials, temporary offices and workshops, including concrete batching plants and aggregate processing plants.

Work No. 14 — This work may be carried out within an area bounded to the north by a line commencing at Coordinates Reference 11, passing generally eastwards, turning south-eastwards at Coordinates Reference 19 to Coordinates Reference 12, then turning north-eastwards and terminating at Coordinates Reference 13, bounded to the south by a line commencing at Coordinates Reference 5, passing eastwards following the existing shoreline and the northern boundary of Works Nos. 12 and 24 and terminating at Coordinates Reference 14, bounded to the west by Work No. 13 and to the east by Work No. 16 and by a line commencing at Coordinates Reference 14, passing north-westwards and terminating at Coordinates Reference 13, as shown on the deposited plans: Filling of land for the construction of port facilities and infrastructure; port surfacing and construction of a quay wall and other above ground works, including associated storage areas, construction of buildings and supporting facilities, drainage, ducting, etc.; and construction of general civil works, earthworks, drainage, ducting, etc., in connection with the construction of Works Nos. 9 and 10.

Work No. 15 — This work may be carried out within an area bounded to the north and east by a line commencing at Coordinates Reference 15, passing south-eastwards and terminating at Coordinates Reference 16, to the south by a line commencing at Coordinates Reference 9, passing eastwards following the northern boundary of Work No. 13 and terminating at Coordinates Reference 16, and to the west by a line commencing at Coordinates Reference 15, passing south-eastwards following the existing shoreline and terminating at Coordinates Reference 9, as shown on the deposited plans: Filling of land for the construction of port facilities and infrastructure; port surfacing and construction of a retaining wall and other above ground works, including associated storage areas, construction of buildings and supporting facilities, drainage, ducting, etc.; and construction of general civil works, earthworks, drainage, ducting, etc., in connection with the construction of Works Nos. 9 and 10.

Work No. 16 — This work may be carried out within an area bounded to the north and east by a line commencing at Coordinates Reference 17, passing south-eastwards following the existing railway and terminating at Coordinates Reference 18, and to the south and west by a line commencing at Coordinates Reference 17, passing southwards to Coordinates Reference 19, turning south-eastwards and following the north-eastern boundary of Work No. 14 to Coordinates Reference 12, then turning north-east and terminating at Coordinates Reference 18, as shown on the deposited plans: Filling of land for the construction of port facilities and infrastructure.

Work No. 17 — This work may be carried out within an area bounded to the north by a line commencing at Coordinates Reference 21, passing north-eastwards to Coordinates Reference 22 then passing southwards and eastwards following the existing shore line and terminating at Coordinates Reference 1, to the east by a line commencing at Coordinates Reference 7, passing north-westwards following the western boundaries of Works Nos. 11 and 12 and terminating at the existing shore line at Coordinates Reference 1, to the west by a line commencing at Coordinates Reference 20, passing north-westwards and terminating at Coordinates Reference 21, and to the south by a line commencing at Coordinates Reference 20, passing north-eastwards and terminating at Coordinates Reference 7, as shown on the deposited plans: Temporary works to facilitate the construction of Work No. 11 and placement of permanent rock armour on the riverbed.

Work No. 18 — This work may be carried out within an area bounded to the north by a line commencing at Coordinates Reference 16, passing eastwards and terminating at Coordinates Reference 11, and to the south by the northern boundary of Work No. 13, as shown on the deposited plans: Construction of general civil works, earthworks, drainage, ducting, etc., in connection with the construction of Works Nos. 9 and 10; and temporary stockpile areas for construction materials, offices and workshops, including concrete batching plants and aggregate processing plants.

Work No. 19 — This work may be carried out within an area bounded to the north by a line commencing at Coordinates Reference 23, passing eastwards and terminating at Coordinates Reference 24, to the south by a line commencing at Coordinates Reference 25, passing generally eastwards following the northern boundary of Works Nos. 14, 15 and 18, to the east by a line commencing at Coordinates Reference 17, passing northwards and terminating at Coordinates Reference 24, and to the west by a line commencing at Coordinates Reference 25, passing northwards and terminating at Coordinates Reference 23, as shown on the deposited plans: Construction of general civil works, earthworks, drainage, ducting, etc., in connection with the construction of Works Nos. 9 and 10.

Work No. 20 — This work may be carried out within an area bounded to the north by a line commencing at Coordinates Reference 26, passing north-eastwards and terminating at the western boundary of Work No. 17 at Coordinates Reference 29, to the west by a line commencing at Coordinates Reference 26, passing south-eastwards and terminating at Coordinates Reference 27, to the east by a line commencing at Coordinates Reference 28, passing north-westwards to the southern boundary of Work No. 17 at Coordinates Reference 7, turning south-westwards to Coordinates Reference 20, then turning north-westwards to Coordinates Reference 29 and to the south by a line commencing at Coordinates Reference 27, passing north-eastwards and terminating at Coordinates Reference 28, as shown on the deposited plans: River training works consisting of one or more low-level retaining structures.

Work No. 21 — A road (849 metres in length) commencing by a junction with Work No. 6, passing generally south-eastwards and terminating at the new quay wall described in Work No. 12 or the new jetty described in Work No. 24.

Work No. 22 — A pipeline (801 metres in length) for the purposes of carrying petroleum product commencing at the boundary of the existing Shell tank farm, crossing the Thameshaven Branch Line and the railway described in Works Nos. 9 and 10, passing generally south-eastwards and terminating at the new jetty described in Work No. 24.

Work No. 23 — A pipeline (3186 metres in length) for the purposes of carrying bitumen product commencing at the boundary of the existing bitumen plant expansion area at a point 160 metres south-east of the bitumen plant, passing southwards, then eastwards, crossing the Thameshaven Branch Line and the railway described in Works Nos. 9 and 10, and then passing generally south-eastwards and terminating at the new jetty described in Work No. 24.

Work No. 24 — This work may be carried out within an area bounded to the north by a line commencing at Coordinates Reference 6, passing generally eastwards following the existing shore line and the southern boundary of Work No. 14 and terminating at Coordinates Reference 14, to the south by a line commencing at Coordinates Reference 8, passing north-eastwards and terminating at Coordinates Reference 30, to the west by a line commencing at Coordinates Reference 8, passing north-westwards following the eastern boundary of Work No. 12 to Coordinates Reference 6, and to the east by a line commencing at Coordinates Reference 30, passing north-westwards and terminating at the existing shoreline at Coordinates Reference 14, as shown on the deposited plans: Demolition of any structures, including jetties and other berthing structures and construction of a jetty.

Work No. 25 — Mitigation works comprising the creation of up to 33 hectares of mudflat by lowering the existing ground level, breaching the existing sea wall and constructing a new sea wall or bund (950 metres in length) commencing by existing footpath FP190 at a point 400 metres south of The Warren cottages, passing eastwards and terminating by existing footpath FP190 at a point 200 metres south-east of Stanhope Industrial Park by Stanford-le-Hope Marshes.

Work No. 26 — Mitigation works comprising the creation of at least 41 hectares of mudflat by lowering the existing ground level, breaching the existing sea wall which commences at a point east of Cliffe Sluice, passes eastwards and terminates east of Salt Fleet and constructing a new sea wall (2720 metres in length along Chainage Reference A) commencing at a point east of Cliffe Sluice by a junction with the existing sea wall, passing eastwards for 50 metres, southwards for 860 metres, turning eastwards following the northern bank of Hope Fleet to the junction with Salt Fleet, then following the northern bank of Salt Fleet before crossing Salt Fleet and turning northwards behind the existing sea wall and terminating at a point east of Salt Fleet by Egypt Bay. This work includes the construction of a temporary quay extending from the existing sea wall for construction and maintenance access only, construction of a temporary road (1712 metres in length along Chainage Reference B) for construction and maintenance access only commencing at a point 180 metres north-east of the junction of Hope Fleet with Salt Fleet, passing south-eastwards for 1712 metres and terminating at the junction with the old sea wall by Decoy Fleet, and improvements to the existing tracks which run, respectively, from the sheepfold adjacent to existing footpath FP37, passing northwards to a point 480 metres east of Cliffe Sluice (836 metres in length along Chainage Reference C), and from Decoy Fleet, passing southwards, to a point 330 metres south-west of Bromhey Farm (2426 metres in length along Chainage Reference D).

Back to top

Options/Help

Print Options

Close

Legislation is available in different versions:

Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.

Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.

Close

Opening Options

Different options to open legislation in order to view more content on screen at once

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as enacted version that was used for the print copy
  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources
Close

More Resources

Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as made version that was used for the print copy
  • correction slips

Click 'View More' or select 'More Resources' tab for additional information including:

  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • links to related legislation and further information resources