Rendered materialE+W
68.—(1) After any specified risk material has been rendered at a licensed rendering plant the operator of the plant must ensure that the rendered material is placed in a container labelled “specified risk material” and disposed of—
(a)by burial at a landfill site for which there exists a current waste management licence granted under section 35 of the Environmental Protection Act 1990 or a permit granted under the Pollution Prevention and Control (England and Wales) Regulations 2000 or the Pollution Prevention and Control (Scotland) Regulations 2000; or
(b)as specified in the licence for the rendering plant; or
(c)by sending to a licensed incinerator.
(2) An operator of an approved rendering plant must ensure that no rendered material produced from any specified risk material—
(a)is consigned from the plant for disposal by burial; or
(b)is disposed of by burial,
unless the specified risk material has been processed at the plant in accordance with method 4 prescribed in Part II of Schedule 6 to these Regulations.
(3) Material rendered from animal material, other than specified risk material from scheme animals, must be disposed of by burning in a manner which has been authorised under the Environmental Protection Act 1990, the Pollution Prevention and Control (England and Wales) Regulations 2000 or the Pollution Prevention and Control (Scotland) Regulations 2000.